How to change the indicator bulb on Citroen Grand C4 Picasso

Having flashing lights that are in good condition is mandatory. As a reminder, forgetting to put a flashing light is liable to 3 point on your driver’s license as well as a fine . Although a few law enforcement officers are lenient on this from time to time. It is therefore essential to have flashing lights in good condition. We will therefore find out with this article how to replace the bulb of a turn signal for a Citroen Grand C4 Picasso, front and rear. It is also conceivable that the dysfunction stems from a bad contact, but this is still quite rare.

Citroen Grand C4 Picasso: things to know before replacing its indicator

First, it is important to properly select the model of your bulb! So not to be mistaken, it is advisable to go to a spare parts website or to your professional who knows how to order them for you. Secondly, you will have to be careful to choose the right color for the bulb. Finally, you will need a tools super basic but still essential. You will therefore mainly need a screwdriver for a Citroen Grand C4 Picasso. A cruciform and torx kit and nothing can happen to you. Almost every time, the bulbs are bayonet . In order to remove the faulty bulb, you will have to turn the bulb a quarter of a turn counterclockwise. In order to put the new bulb, you will then have to turn it a quarter of a turn in the opposite direction.

How to change the bulb of a front indicator on a Citroen Grand C4 Picasso

There are two different solutions to access the turn signals. It depends on the model, but accessibility can be done either from the outside or from the inside on a Citroen Grand C4 Picasso. Access from inside the engine : First of all, you will have to open the hood. And then you have to loosen a cover using a screwdriver (frequently torx) to access the headlight assembly. Once the block is unclipped, remove it and do not hesitate to replace your bulb. Wheel arch access : Inspect the underside of the wheel to see if the fasteners are there. If this is what happens, you will have to disassemble the fasteners and remove the screws with a screwdriver. Secondly, remove the headlight block of the Citroen Grand C4 Picasso gently from the front. All you have to do is replace your bulb and put the unit back in the other direction. More rarely, on some models it is still conceivable to remove the headlight unit from the outside. However, it is quite rare. If this is what happens, using a screwdriver you will need to remove the fasteners, remove the headlight assembly gently and replace your failed bulb.

How to change the bulb of a rear indicator on a Citroen Grand C4 Picasso

There are also two different solutions to access your turn signal bulb. It may depend on the models, however accessibility can be done either from inside or outside. Access from inside the trunk : Frequently accessibility can be done from inside the trunk. Regarding the light blocks, there are screws and fixings. Remove them and set the block down gently. Finally, you simply have to replace your faulty bulb with the new one. And then repeat this operation in reverse order. It is also conceivable that the accessibility is from the outside or under the wheel arch. However, it is much rarer. In any case, you will have to take your screwdrivers and gently remove the headlight assembly assembly so as to replace the bulb. To put it in place, perform the reverse manipulation.