Opel (Vauxhall) Vivaro B (2G) fuse and relay

Opel (Vauxhall) Vivaro B presents the 2nd generation Vivaro. Years of issue: 2014, 2015, 2016, 2017, 2018, 2019. In this article you will find a designation of fuses and relays Vauxhall ( Opel) Vivaro B with boxes diagrams and their locations. Note the cigarette lighter fuse.

The number of elements in the boxes may differ from that shown and depends on the year of manufacture and the region of delivery. Check the description with your technical documentation.

Passenger compartment fuses and relay boxes

Fuse box

It is located on the left side of the instrument panel – behind the cover on the LHD vehicles.


Or in the glove box on the RHD.

the photo


F1 30A + battery feed rear window wiper
F2 10A Main electromagnetic horn
F3 15A + battery feed boot accessories socket
F4 30A + battery feed driver’s window lift motor time delay
F5 15A + current distribution rear accessories socket
F6 5A BCM start-up +
F7 15A + after ignition feed heated seats
F8 5A + EMM battery feed (after ignition feed charge on VSC) AVS,AUO
15A + EMM battery feed (after ignition feed charge on VSC) SOP03C
F9 5A + overall current distribution
F10 15A + cigarette lighter socket or front accessory socket current distribution
F11 25A + EMM battery feed (R daytime running lights, front position, R main beam headlights, L dipped beam headlights)
F12 5A + timed battery feed brake lights, ABS, transponder
F13 10A + timed battery feed interior lights and air conditioning
F14 5A + timed battery feed steering wheel angle Stop and Start keyless vehicle
F15 25A + After ignition feed rear window wiper, window washer pump, horn
F16 10A Overall + after ignition feed
F17 5A + after ignition feed reverse gear lights
F18 5A + after ignition feed stop switch
F19 5A + after ignition feed injection, starter relay, BCM
F20 5A + after ignition feed airbag, column lock
F21 30A + after ignition feed passenger window lift switch
F22 10A + after ignition feed power steering pump
F23 15A + EMM battery feed brake lights
F24 15A + battery feed BCM (+ timed battery feed)
F25 10A + battery feed BCM, electronic calculation units tyre pressure monitoring system and keyless vehicle
F26 15A + battery feed BCM for hazard warning and direction lights
F27 25A + battery feed BCM for locking of opening elements
F28 25A + EMM battery feed for L daytime running lights, rear position, Lmain beam headlights, R dipped beam headlights
F29 25A + EMM battery feed number plate position, front and rear fog lights
F30 15A + battery feed single lever, alarm, horn
F31 5A + battery feed dashboard
F32 5A + battery feed single lever
F33 20A + battery feed tow bar socket preequipment
F34 15A (supplied in tow bar kit)
F35 5A + battery feed circuit breaker radio, multimedia, mirrors, fault finding socket
F36 5A + feed mirror heater
F37 10A + timed battery feed electric mirrors, additional adapter unit UCE
F38 40A + battery feed circuit breaker tachygraphy
F39 40A + battery feed windscreen wiper
F40 20A + battery feed current distribution relay 1 (heating, air conditioning)
F41 15A + current distribution feed pre-equipment additional adaptations
F42 10A + battery feed heater
F43 10A + feed engine running additional adaptation
F44 25A + feed engine running heater
F45 25A + after ignition feed additional air conditioning unit
F46 25A + after ignition feed relayed for keyless vehicle
F47 20A + EMM battery feed for non-load shed current distribution relay

The fuse number 10 at 15A is responsible for the cigarette lighter.

Relay box

The additional relay box is on the right side – in the glove box on the LHD.

Or behind the cover on the RHD.


RH3 40A Windscreen wiper relay
RH4 40A Windscreen wiper 2nd speed relay
RH5 40A + after ignition feed relay heating and rear air conditioning
RH6 20A Support relay water pump heater matrix
RH7 20A Driver’s door electrical unlocking relay (SDO)
RH8 70A + current distribution relay no. 1
RH9 40A + current distribution relay no. 2
RH11 20A Electric window lift relay
RH12 40A Mirrors + rear window heater relay
RH13 40A Rear window wiper relay
RH14 20A Door central locking relay
RH15 20A Electric window lift relay
RH16 40A After ignition feed relay no. 2 (hands-free card vehicles)
RH17 40A Engine running + relay

Engine compartment

Located on the left, next to the battery.


Protected components

F4 30 Starter
F5 70 Passenger compartment 1
F6 70 Passenger compartment 3
F8 60 Passenger compartment 2
F9 20 Mirrors heater
40 Rear window + mirrors heater
F14 15 + battery feed air conditioning compressor
F15 15 Fuel pump
F16 70 Heater control unit
F17 60 Heating element unit
F18 60 Heating element unit
F19 40 Engine suffix *408 and air conditioning or 450 and heating Motor-driven fan assembly 1
50 Engine suffix *408 and heating or 450 and air conditioning Motor-driven fan assembly 1
F20 40 Engine suffix *408 and air conditioning or 450 Motor-driven fan assembly 2
F26 25 Diesel heater
F27 20 Engine injection system
F28 15 Engine injection system
R1 20 Starting
R2 20 Fuel pump relay
R3 40 Injection supply relay
R4 20 Compressor control relay
R6 70 Highspeed (Motor-drivenfan assembly 1)
R7 40 Low speed (Motor-driven fan assembly)
R8 40 Highspeed (Motor-drivenfan assembly 2)
D1 Air conditioning compressor

Electrical distribution unit

Located near the battery itself.



  1. Battery protection supply wiring
  2. 300A Engine wiring (Alternator)
  3. 300A Engine wiring (starter motor)
  4. 5A Mini fuse with cap (Start/Stop)
  5. 5A Cab wiring (Start/Stop)
  6. 50A Cab wiring (conversion KPD and KC6 options or trailer tow bar)
  7. Reserved for purpose-body builder conversions
  8. 35A Engine wiring (engine management)
  9. Engine Connection Unit
  10. 120A Cab wiring (power steering)

If you want to help supplement the material – write in the comments.