2003 Volkswagen Fox reseting computer after oil change

  • MEMBER
  • 2003 VOLKSWAGEN FOX
  • 4 CYL
  • FWD
  • MANUAL
  • 62,000 MILES

3 Replies

  • EXPERT

� With «OEL1.S» indicated on display, press lower digital clock reset button or analog clock reset button. Fig. 16: OEL1.S Indicated On Display Courtesy of VOLKSWAGEN OF AMERICA, INC. 7500 (miles) or 12,000 (km) indicated on display Distance can now be set for the next oil change. Example: The instrument cluster is replaced on a 4 month old vehicle with 5000 miles. The 5000 accumulated miles must be subtracted from the displayed mileage setting of 7500. The new mileage setting should read 2500 (7500 — 5000 = 2500). � Press lower digital clock reset button or analog clock reset button to decrease mileage in intervals of 500 until correct setting is displayed. After OEL1.S distance counter is set correctly: � Press odometer reset button. «OEL2.S» (time counter) indicated on display � Press lower digital clock reset button or analog clock reset button. «6» (months) indicated on display Time can now be set for the next oil change. Example: In the previous example, the instrument cluster was replaced on a 4 month old vehicle. The accumulated time of 4 months must be subtracted from the displayed setting of 6. The new time setting should read 2 (6 — 4 = 2). � Press lower digital clock reset button or analog clock reset button to decrease time setting until correct setting is displayed. After OEL2.S time counter is set correctly: � Press odometer reset button. «IN01.S» (time counter) indicated on display � Press lower digital clock reset button or analog clock reset button. «12» (months) indicated on display Time can now be set for the next maintenance interval. Example: In the previous example, the instrument cluster was replaced on a 4 month old vehicle. The accumulated time of 4 months must be subtracted from the above displayed setting of 12. The new time setting should read 8 (12 — 4 = 8). � Press lower digital clock reset button or analog clock reset button to decrease time setting until correct setting is displayed. After IN01.S time counter is set correctly: � Press odometer reset button. «IN02.S» (distance counter) indicated on display � Press lower digital clock reset button or analog clock reset button. 30,000 (miles) or 48,000 (km) indicated on display Distance can now be set for next 30,000 mile (48,000 km) maintenance interval. Example: In the previous example, the 5000 accumulated miles must be subtracted from the above displayed mileage setting of 30,000. The new mileage setting should read 25,000 (30,000 — 5000 = 25,000). � Press lower digital clock reset button or analog clock reset button to decrease mileage setting in intervals of 500 until correct setting is displayed. After IN02.S time counter is set correctly: � Switch ignition OFF. SRI programming is stored NOTE: The IN01.S display (usually associated with the 15,000 mile/24,000 km maintenance) is programmed by months only (not distance) and uses the distance counter from the OEL1.S (7500 mile/12,000 km oil change) which was set previously. NOTE: The IN02.S display is programmed by distance only (not time) and uses the time counter from the IN01.S (12 month maintenance) which was set previously.
10/11/2009 .